TASCAM DM-3200 Digital Mixer
The TASCAM DM-3200 has more of everything that made the DM-24 a pedigreed studio workhorse.
It has 4-band fully-parametric EQ and dynamics on every channel and two effects processors, each capable of running the built-in TC Works Reverb processor. Surround mixing is available with up to 6.1-channel panning, and the optional IF-SM/DM expansion card adds surround monitoring and downmixing to the DM-3200. The DM-3200 provides a new way to record with DAW recording software. With the addition of an optional expansion card, the IF-FW/DM FireWire interface, the DM-3200 becomes a 24-channel computer audio interface, making it a complete studio solution for professional DAW recording. Built-in HUI, Mackie Control and FW-1884 emulation allows the console to function as a flexible control surface for workstation software. This gives you the best of both worlds - total control over your recording software transport and mixing capabilities with the cue mixing, talkback, microphone preamps and world-class automation provided by the DM-3200.
* 32 channels and 16 auxiliary returns for 48 total inputs
* 16 buses — configurable as two 6.1 surround sends
* 8 Aux Sends
* 16 analog mic/line inputs with phantom power for condenser mics, analog inserts and -20dB pad switch
* 24 channels of TDIF and 8 channels of ADAT built in
* 2 expansion card slots support optional FireWire, ADAT, AES/EBU, Analog & TDIF cards
* Dedicated cascade port supports cascade of two DM-3200s
* Per channel LED ring encoders for pan, aux sends and EQ
* Built-in DAW control
* All inputs, effects and processing are available at 96k - no features are sacrificed at full sampling rate
* Transport controls control DAW, HDR or tape playback
* Dedicated DAW control surface layer for Digidesign Pro Tools©, Cakewalk SONAR©, MOTU DP , Apple Logic, Steinberg Cubase© and Nuendo©
* Powerful automation with touch-sensitive motorized faders
* 4-band parametric EQ and dynamics on each channel
* 32-bit internal resolution with 64-bit EQ resolution
* Two built-in effects processors include TC Works reverb processing
* Flexible routing — route from virtually any input to any output
* Back up mix data to convenient Compact Flash media slot or to USB
* Optional MU-1000 meter bridge
* Stylish, professional design with rear panel I/O connections
* TASCAM Mixer Companion software (Win XP/OSX) with:
* Driverless USB connection to computer
* Backup/restore data via USB
* On screen timecode, transport and meter displays
* Maximum overall dimensions (w x d x h): 27.6" x 32.9" x 9.1"_(700mm x 836mm x 230mm)
* Weight 52.8lbs (24kg
Analog audio I/O
All specifications are given with the factory reference
* level of —16 dBFS.
MIC inputs (channels 1 through 16) balanced XLR-type female connectors
* adjustable input level: (—60 dBu (TRIM max) to —4 dBu (0 dB pad))
* (—40 dBu (TRIM max) to +16 dBu (—20 dB pad))
* Input impedance 2.2k Ohms
* PHANTOM (+48V) +48 V phantom power. Switchable in blocks of 4 channels
* (1—4, 5—8, 9—12, 13—16)
* LINE IN (BAL) inputs (channels 1 through 16) balanced 1/4" jacksb
* adjustable input level (—44 dBu (TRIM max) to +12 dBu (TRIM min))
* Input impedance 10k Ohms
* INSERT connections (channels 1 through 16)od 1/4" TRS jacksc
* Send: nominal output level —2dBu, maximum output level +14 dBu,
* impedance 100 Ohms
* Return: nominal input level —2dBu, headroom 16 dB, impedance 10 kohms
* ASSIGNABLE RETURNS (BAL) (1 through 4) Balanced 1/4" jacks
* Nominal input level: +4 dBu
* Headroom: 16 dB
* Input impedance: 5k Ohms
* ASSIGNABLE SENDS (1 through 4) Pseudo-balanced 1/4" jacks
* Nominal output level: —2 dBu
* Maximum output level: +14 dBu
* Output impedance: 100 Ohms
* 2 TR IN (L/R) 2 x RCA pin jacks
* Nominal input level —10 dBV
* Headroom: 16 dB
* Input impedance: 10 k Oms
* STEREO OUTPUT (L/R) Balanced XLR-type male connectors
* Nominal output level: +4 dBu
* Maximum output level: +20 dBu
* Output impedance: 100 Ohms
* MONITOR OUTPUTS (CR (BAL)) Pseudo-balanced 1/4" jacks
* Nominal output level: +4 dBu
* Maximum output level: +20 dBu
* Output impedance: 100 Ohms
* MONITOR OUTPUTS (STUDIO) RCA pin jacks
* Nominal output level —10 dBV
* Maximum output level: +6 dBV
* Output impedance: 100 Ohms
* PHONES 2 x 1/4" stereo jacks
* 50 mW + 50 mW total
* 32 Ohms
* a. all XLR-type connectors are wired 1=ground, 2="hot", 3="cold"
* b. all balanced 1/4" jacks are wired sleeve=ground, ring=cold, tip=hot
* c. all TRS 1/4" jacks are wired sleeve=ground, ring=return, tip=send
* d. Maximum with both PHONES jacks driven at maximum
Digital audio I/O
* DIGITAL INPUTS (1, 2) 2 x XLR-type female connectors (input impedance 110 Ohms) or
* 2 x RCA pin jacks (input impedance 75 Ohms) (selectable)
* AES3-1992 or IEC60958 data format (automatically detected)
* 24-bit word length
* Switchable sampling frequency conversion available
* DIGITAL OUTPUTS (1, 2) 2 x XLR-type male connectors (output impedance 110 Ohms)
* 2 x RCA pin jacks (output impedance 75 Ohms)
* AES3-1992 or IEC60958 data format (software selectable)
* 24-bit word length
* TDIF-1(1, 2, 3) 3 x 25-pin (female) D-sub connectors (metric lock screws)
* Conform to TDIF-1 standard
* 24-bit word length
* ADAT IN/OUT 2 x "Lightpipe" optical connectors
* Conform to ADAT OPTICAL specifications
* 24-bit word length
* Sampling frequencies Internal 44.1 kHz/48 kHz, 88.2 kHz/96 kHz (high sampling frequencies)
* External ±6.0%
* Signal delay < 1.7 ms — Fs = 48 kHz, LINE IN to STEREO OUTPUT
* < 0.85 ms — Fs = 96 kHz, LINE IN to STEREO OUTPUT
Miscellaneous I/O connections
* WORD SYNC IN BNC connector
* Switchable 75 Ohms termination
* TTL level
* WORD SYNC OUT/THRU BNC connector
* Switchable between through and output
* TTL level
* MIDI IN, OUT, THRU/MTC OUT 3 x 5-pin DIN connectors—conform to MIDI specifications
* USB USB 1.1 B' type connector (12 Mbps)
* TIME CODE IN RCA pin jack
* Conforms to SMPTE specifications
* FOOT SW 1/4" mono jack
* TO METER 25-pin female D-sub connector (non-metric lock screws)
* For use with the optional MU-1000
* RS-422 (for Sony 9-pin) 9-pin female D-sub connector (non-metric lock screws)
* wired to RS-422 standards
* GPI (for Machine start) 9-pin female D-sub connector (non-metric lock screws) wired for GPI control
* Pin 1=GP11, Pin 2=GPI2, Pin 3=GPI3, Pin 4=GPI4, Pin 5=GND, Pin
* 6=GPI5, Pin 7=GPI6, Pin 8=GPI7, Pin 9=GP18
Specifications : Equalization
* Equalization
* All filters are fitted with "gain flat" switches
* System performance
* Physical characteristics
* EQ switch On/Off
* HIGH filter Gain: ±18 dB, 0.5 dB resolution
* Frequency: 31 Hz to 19 kHz
* Q: 0.27 to 8.65
* Type: Hi-shelving, Peak, LPF
* HI MID filter Gain: ±18 dB, 0.5 dB resolution
* Frequency: 31 Hz to 19 kHz
* Q: 0.27 to 8.65
* Type: Peak, Notch
* LO MID filter Gain: ±18 dB, 0.5 dB resolution
* Frequency: 31 Hz to 19 kHz
* Q: 0.27 to 8.65
* Type: Peak, Notch
* LOW filter Gain: ±18 dB, 0.5 dB resolution
* Frequency: 31 Hz to 19 kHz
* Q: 0.27 to 8.65
* Type Low-shelving, Peak, HPF
* THD (maximum level,
* 1 kHz, TRIM: minimum)
* 20 Hz — 22 kHz LINE IN to INSERT SEND
* LINE IN to STEREO OUTPUT
* < 0.005%
* < 0.008%
* Frequency response
* (nominal level, 1 kHz,
* TRIM: minimum)
* 0.5dB/-1.0dB MIC/LINE to INSERT SEND
* 0.5dB/-1.5dB MIC/LINE to INSERT SEND
* 0.5dB/-1.0dB MIC/LINE to STEREO OUTPUTa
* 0.5dB/-1.5dB MIC/LINE to STEREO OUTPUTa
* a. MIC/LINE to channel module to STEREO OUTPUT, channel and stereo faders at 0 dB, pan hard left or hard
* right
* 20 Hz — 20 kHz (44.1/48 kHz)
* 20 Hz — 40 kHz (88.2/96 kHz)
* 20 Hz — 20 kHz (44.1/48 kHz)
* 20 Hz — 40 kHz (88.2/96 kHz)
* Noise level (20 Hz —
* 22 kHz, TRIM: max,
* 150 ohms)
* MIC in (PAD off) to INSERT SEND (A weight)
* STEREO OUT (Input no assign)
* ASSIGNABLE RETURN to ASSIGNABLE SEND
* 2TR IN to CR OUTPUT (CR: max, 0dB)
* 2TR IN to STUDIO OUT (STUDIO OUT 0dB)
* < —128 dBu (EIN)
* < —83 dBu
* < —85 dBu
* < —78 dBu
* < —88 dBu
* Crosstalk @ 1 kHz STEREO/BUSS/AUX OUTPUTS
* MONITOR OUTPUTS
* > 90 dB
* > 90 dB
* Displays Backlit 320 x 240 LCD with contrast control
* 2 x 12-segment LED meters
* Faders 17 x 100 mm stroke, motor-driven touch-sensitive faders
* Maximum overall dimensions (w x d x h) including rest 700 x 824 x 230 (mm) 27.6 x 32.4 x 9.1 (in)
* Weight 24 kg (52.8 lbs)
* Voltage requirements 120 VAC, 60 Hz
* 230 VAC, 50 Hz
* 240 VAC, 50 Hz
* Power consumption 65 W
* Supplied accessories Power cord, Quick Reference guide, 32 MB CF memory card, USB cable,
* CD-ROM, warranty card
TASCAM DM-3200 Digital Mixer Includes:
Supplied accessories Power cord, Quick Reference guide, 32 MB CF memory card, USB cable,
Order today with the no-risk assurance of our Total Satisfaction!
!
<<
|
|